From rough lumber
to finished piece.
Every commission moves through the same five stages — slowly, and mostly by hand. Here's what that actually looks like.
We'd rather build twelve pieces a year well than forty pieces quickly.
Our shop is small on purpose. Every board that comes through it gets looked over by one of us before it's cut, and every joint gets cut by hand or guided through the machine by hand — nothing runs unattended. It's slower. We think it's also the only way to build furniture that's actually meant to last.
Design & Materials
We start in your space, not ours — measuring the room, talking through how the piece will actually be used, and sketching options by hand. Once a direction is set, we select and personally inspect every board.
Milling & Joinery
Rough lumber is dimensioned, jointed, and laid out for grain and color match before a single joint is cut. Where it matters — drawer boxes, structural joints — we cut by hand.
Assembly
Pieces are dry-fit and adjusted, then glued up in stages, checked for square at every step. Hardware is fit and removed before finishing, so nothing gets in the way of a clean surface.
Finishing
We favor hand-rubbed oils and hard wax finishes that age gracefully and are easy to renew at home, over film finishes that look good on day one and chip by year three.
Delivery & Install
For anything built-in, we deliver and install it ourselves. For furniture, we hand-deliver within Colorado and crate carefully for anything shipping further.
Solid Hardwoods
Walnut, white oak, and ash, sourced from domestic mills we've worked with for years. No veneers, no particleboard, ever.
Hand-Cut Joinery
Dovetails, mortise-and-tenon, and breadboard ends — joinery chosen because it's the strongest method for the job, not because it photographs well.
Natural Finishes
Hardwax oils and traditional finishes that let the grain show, resist water and wear, and can be touched up at home for decades.